Body:

​This guide is outlines the process for migrating mailboxes and service settings from one Microsoft Office 365 for enterprises tenant to another Office 365 tenant in a business-merger scenario (E and P SKUs only). If you have more than 500 users to migrate or a large amount of SharePoint data to migrate, it is highly recommended that you work with an Office 365 partner.

The scenario in this guide is based on two companies Contoso.com and Fabrikam.com using two separate Office 365 tenants. Contoso has purchased Fabrikam and is moving the Fabrikam users and data to the contoso.com Office 365 tenant.

 

Tenant 1 (Target) Tenant 2 (Source)

Custom email domain:

contoso.com

fabrikam.com

Office 365 initial domain:

contoso.onmicrosoft.com

fabrikam.onmicrosoft.com

This scenario assumes that user, group and other objects from the Fabrikam Company will either be manually created in the Office 365 portal, imported into the portal via script or merged into the Contoso Active Directory through Active Directory Domain Services (AD DS) consolidation. When complete, all Fabrikam accounts will exist in the Contoso.com Office 365 tenant, and will all use @fabrikam.com for the UPN. The final addressing scheme was chosen for simplicity and brevity but can of course be modified to meet your requirements.

 

Merged mail migration

 

 

If using a third party migration tool to migrate your users, purchase the needed licenses for your migration.

Client considerations

For Outllok 2010 and Outlook 2013, you only need to delete the Outlook user profile.

For Outlook 2007 and Outlook 2010, when you are restarting, auto-discover will configure the client and rebuild the .OST file.

For the Lync client, you will need to add contacts once migration is complete.

Tenant preparation and licensing

The source tenant is the Fabrikam Office 365 tenant from which you are migrating users and data. The target tenant is the Contoso Office 365 tenant to which you are migrating.

  1. Increase licenses in Target Office 365 tenant to accommodate all mailboxes that will be migrated from the source tenant.

  2. Create Administrator accounts in source and target tenants for use in migrating from Office 365 to another Office 365. Some migration tools may require more than one admin account in the source tenant to optimize the data throughput.

Room, resource, distribution group, and user object creation in the target tenant

To create the resources in the target (Contoso) tenant:

  1. If the Microsoft Directory Synchronization (directory sync) tool will be used to sync all objects from the Contoso Active Directory Domain Services (AD DS), the objects from the source (Fabrikam) tenant AD DS must be created in the target tenant (Contoso) AD DS through consolidation.

    1. AD DS consolidation can be done using various AD DS tools. Consolidation can take extra time and planning depending on how many objects are being moved, so it can be completed ahead of the migration project.

    2. Verify that all new users and groups are synced to the Contoso.com target tenant via directory sync. The objects should appear as user@contoso.onmicrosoft.com in the new tenant since the Fabrikam domain has not been moved over at this time. The primary email address for the users and groups can be updated to @fabrikam.com after the domain move is complete.

  2. If directory sync will not be used, or if any Rooms, Resources, Groups or Users are managed in the Office 365 admin center of the source tenant; these objects must be created in the target tenant. Objects can be created manually in the Office 365 admin center or for larger numbers import a CSV file by using the bulk add feature in the Office 365 admin center, or by using Windows PowerShell.

End-user communications

To communicate the migration to the end users in your organization:

  1. Create a communication plan and begin to notify users of the upcoming migration and service changes.

  2. After migration, the nickname cache will have to be cleared on all Outlook clients. See How to reset the nickname and the automatic completion caches in Outlook for an automated fix-it-tool that can be run by the end users.

  3. Make users aware of how to connect to Outlook Web App with their new sign on information in case they have a problem after migration.

Domain preparation

To prepare the domain for migration, complete the following steps.

  1. Begin domain verification process on target (Contoso) tenant for the Fabrikam.com email domain.

  2. In the contoso.com Office 365 admin center, add the Fabrikam.com domain and create TXT records in Domain Name Systems (DNS) for verification.

    NoteNote:
    The verification will fail because the domain is still in use in the other tenant.

    Performing this step now will allow the DNS record time to propagate as it can take up to 72 hours. Final validation will occur later in the process.

Migration scheduling

To schedule the migration:

  1. Create master list of user mailboxes you want to migrate.

  2. Create mailbox mapping .CSV file for the third-party migration tool you are using. This mapping file will be used by the migration tool to match the source mailbox with the target tenant mailbox when migration occurs. We recommend that you use the *.onmicrosoft.com ‘initial’ domain for mapping the source accounts since the custom email domain will be constantly changing.

 

Example mail CSV file

 

Mail exchanger record (MX record) time to live (TTL) test

Next, you’ll schedule the TTL test.

  1. In DNS, change the TTL value on the MX record for the primary email domain you wish to transfer to a small number (i.e. 5 minutes). If the TTL cannot be lowered to 5 minutes, make note of the lowest value. Example, if the lowest value is 4 hours, the MX record will have to be changed 4 hours before your migration begins.

  2. Mx Lookup can be used to verify MX and DNS changes.

Disable directory sync in source tenant

In the source tenant Office 365 admin center, disable directory sync. This process can take 24 hours or more so it must be done ahead of the migration. Once disabled in the portal, any changes to the source tenant AD DS will no longer sync to the Office 365 tenant. Adjust your existing user and group provisioning process accordingly.

These are the steps you’ll need the day you perform the migration.

MX record change – Stop inbound mail flow

Change your primary MX record from Office 365 to domain that is not reachable, i.e. “unreachable.example.com”. Internet mail servers attempting to deliver new mail will queue the mail and attempt redelivery for 24 hours. Using this method, some email may return a non-delivery report (NDR) depending on the server attempting to deliver the email. If this is a problem use an MX record backup service. There are many third party services that will queue your email for days or weeks. Once your migration is complete, these services will deliver the queued mail to your new Office 365 tenant.

TipTip:
If your TTL is short, for example, five minutes, this step can be done at the end of the work day to cause less disruption. If you have a larger TTL, you must change the MX record ahead of time to allow the TTL to expire. Example, a four hour TTL must be changed before 2 PM if you plan to begin migrations at 6 PM.

Verify your MX and DNS changes if necessary. Nslookup or a service like MxToolbox can be used to verify MX and DNS changes.

Source tenant preparation

The primary email domain, fabrikam.com, must be removed from all objects in the source tenant before the domain can be moved to the target tenant.

  1. If you had also set up your domain with your SharePoint Online public website, then before you can remove the domain, you first have to set the website’s URL back to the initial domain.

  2. Remove all Lync licenses from the users in the source tenant using Lync admin portal. This will remove the Lync Sip address connected to Fabrikam.com.

  3. Reset default email addresses on Office 365 source mailboxes to the initial domain (fabrikam.onmicrosoft.com).

  4. Reset default email addresses on all Distribution Lists, Rooms and Resources to the initial domain (fabrikam.onmicrosoft.com) in source tenant (Example: Change the Primary E-Mail Address for Lots of Users

  5. Remove all secondary email (proxy addresses) from user objects that are still using @fabrikam.com. See Office 365 Bulk password reset sample in Appendix for a sample script.

  6. Set default domain in source tenant to fabrikam.onmicrosoft.com routing domain (in the admin portal, click your company name in the upper right corner).

  7. Use Windows PowerShell command Get-MsolUser -DomainName Fabrikam.com to retrieve a list of all objects that are still using the domain and blocking removal.

  8. For common domain removal issues, see You get an error message when you try to remove a domain from Office 365.

Target tenant preparation

Complete the verification of the Fabrikam.com domain in the contoso.com tenant. You may have to wait one hour after removing the domain from the old tenant.

  1. Configure auto-discover CNAME (internal/External) optional.

  2. If you are using AD FS, configure the new domain in target tenant for AD FS.

  3. Begin mailbox activation in the contoso.com tenant > Assign licenses to all of the new user accounts.

  4. Set the Fabrikam.com email domain as the primary address on the new users. This can be done by selecting/editing multiple unlicensed users in the portal or by using Windows PowerShell.

  5. If you are not using the password sync feature or AD FS, set password on all mailboxes in the target (Contoso) tenant. If you are not using a common password, notify users of the new password. See Office 365 Bulk password reset samplee in the Appendix.

  6. Once mailboxes are licensed and active, transition the mail routing. Point the Fabrikam MX record to Office 365 target (Contoso) tenant. When the MX TTL expires, mail will begin to flow into the new empty mailboxes. If you are using an MX backup service, you can release the email to the new mailboxes.

  7. Perform verification testing of mail flow to/from new mailboxes in the target tenant.

  8. If you are using Exchange Online Protection (EOP): In the target tenant recreate transport rules, connectors, white/black lists etc. from source tenant.

Begin migration

To minimize downtime and user inconvenience, determine the best method for migration.

  • Migration for 500 users or less: Migrate Mail Calendar and contact data to target tenant mailboxes. Limit mail migration by date if possible; for example, the last 6 months of data.

  • Migration for more than 500 users: Use a multi-pass approach where you migrate contacts, calendars and only 1 week of email for all users, then on succeeding days or weeks, do multiple passes to fill in the mailboxes with older email data

Start your mail migration via the third party migration tool.

  1. Monitor migration progress with the tools provided by the vendor. Send out periodic progress reports during migration to management and migration team.

  2. Do second or third pass migrations, optional after all migrations are complete.

At the end of migration, Outlook 2007 and 2010 will sync the entire mailbox for each user, consuming considerable bandwidth depending on how much data you migrated into each mailbox. Outlook 2013 will only cache 12 months of data by default. This setting can be configured to more or less data, for example, only 3 months of data, which can lighten bandwidth usage.

Post migration: Cleanup

User may receive NDRs when replying to migrated email messages. The Outlook nickname cache needs to be cleared. See How to reset the nickname and the automatic completion caches in Outlook, section: “How to clear the whole nickname cache.” Alternatively, add the old legacy DN as an x.500 proxy address to all users.

Microsoft Corporation (or based on where you live, one of its affiliates) does not provide any guarantees or support services related to the script samples listed in this document. You may use them at your own risk.

Office 365 Bulk password reset sample
  1. Create a CSV file named password.csv.

  2. Insert “upn” and “newpassword” columns in this file (Example: johnsmith@contoso.com,Password1)

  3. Use the Windows PowerShell command:

     
    Import-Csv password.csv|%{Set-MsolUserPassword -userPrincipalName $_.upn -NewPassword $_.newpassword -ForceChangePassword $false}
    
    
 
###################################################################################################
# Script: showproxies.ps1
# Copies all accounts in Office 365 that contain/don't contain a specific 
# proxyaddress to a .CSV file (addresses.csv) 
#  
# Change the following variable to the proxy address string you want to find:
# $proxyaddr = "onmicrosoft.com"  
###################################################################################################

$proxyaddr = "onmicrosoft.com" 

# Create an object to hold the results  
$addresses = @()  
# Get every mailbox in the Exchange Organisation  
$Mailboxes = Get-Mailbox -ResultSize Unlimited  
# Loop through the mailboxes  
ForEach ($mbx in $Mailboxes) {  
    # Loop through every address assigned to the mailbox  
    Foreach ($address in $mbx.EmailAddresses) {  
       # If it contains XXX,  Record it  
        if ($address.ToString().ToLower().contains("onmicrosoft.com")) {  
            # This is an email address. Add it to the list  
            $obj = "" | Select-Object Alias,EmailAddress  
            $obj.Alias = $mbx.Alias  
            $obj.EmailAddress = $address.ToString() #.SubString(10)  
            $addresses += $obj  
      }  
    }  
}  
# Export the final object to a csv in the working directory  
$addresses | Export-Csv addresses.csv -NoTypeInformation  
# Open the csv with the default handler  
Invoke-Item addresses.csv  

##### END OF SHOWPROXIES.PS1

 
#################################################################################################
#  Script: create-rooms.ps1
#  Description:*** RUN THIS SCRIPT FROM A WINDOWS POWERSHELL SESSION ***
#This script creates Room mailboxes in Office 365.
# Syntax:Create-Rooms.ps1 -inputfile "file name.csv"
#
# Dependencies: Input file should contain 3 columns: RoomName, RoomSMTPAddress, RoomCapacity
#
#################################################################################################

param( $inputFile )

Function Usage
{
$strScriptFileName = ($MyInvocation.ScriptName).substring(($MyInvocation.ScriptName).lastindexofany("") + 1).ToString()

@"

NAME:
$strScriptFileName

EXAMPLE:
C:PS> .$strScriptFileName -inputfile `"file name.csv`"

"@
}

If (-not $inputFile) {Usage;Exit}


#Get MSO creds and initialize session
If ($cred -eq $NULL) {$Global:cred = Get-Credential}

#
If ($ExchRemoteCmdlets.AccessMode -ne "ReadWrite")
{
Write-Host
Write-Host Connecting to Office 365...
Write-Host
$NewSession = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri https://ps.outlook.com/powershell -Credential $cred -Authentication Basic -AllowRedirection
$Global:ExchRemoteCmdlets = Import-PSSession $NewSession
}

#Import the CSV file
$csv = Import-CSV $inputfile

#Create Rooms contained in the CSV file
$csv | foreach-object{

New-mailbox -Name $_.RoomName -room -primarysmtpaddress $_.RoomSMTPAddress -resourcecapacity $_.RoomCapacity

}

##### END OF CREATE-ROOMS.PS1


 
#################################################################################################
#      Script:  remove-proxy.ps1
#Description:*** RUN THIS SCRIPT FROM A WINDOWS POWERSHELL SESSION ***
#This script will remove a secondary email address from many users 
#
# Syntax:remove-proxy.ps1 -inputfile "filename.csv"
#
# Dependencies:Input file should contain 2 columns: Username, Emailsuffix 
#               Example:  Username=tim, Emailsuffix=fabrikam.com 
#Script will remove the address tim@fabrikam.com from the mailbox for Tim.
#NOTE: Address must be secondary; it will not remove primary email address.
#
################################################################################################

param( $inputFile )

Function Usage
{
$strScriptFileName = ($MyInvocation.ScriptName).substring(($MyInvocation.ScriptName).lastindexofany

("") + 1).ToString()

@"

NAME:
$strScriptFileName

EXAMPLE:
C:PS> .$strScriptFileName -inputfile `"file name.csv`"

"@
}

If (-not $inputFile) {Usage;Exit}


#Get MSO creds and initialize session
If ($cred -eq $NULL) {$Global:cred = Get-Credential}

#
If ($ExchRemoteCmdlets.AccessMode -ne "ReadWrite")
{
Write-Host
Write-Host Connecting to Office 365...
Write-Host
$NewSession = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 

https://ps.outlook.com/powershell -Credential $cred -Authentication Basic -AllowRedirection
$Global:ExchRemoteCmdlets = Import-PSSession $NewSession
}

#Import the CSV file and change primary smtp address

$csv = Import-CSV $inputfile
$csv | foreach-object{


# Set variable for email address to remove
$removeaddr = $_.username + "@" + $_.emailsuffix
Write-Host ("Processing User: " + $_.UserName +" - Removing " + $removeaddr)

Set-Mailbox $_.Username -EmailAddresses @{Remove=$removeaddr} 

}

##### END OF REMOVE-PROXY.PS1

Source: http://technet.microsoft.com/en-us/library/dn629578.aspx
Published: 5/7/2014 10:11
]]>